alpex L male thread elbow 40mm - 1 ¼”MT

FRÄNKISCHE offers the innovative advantage of five possible crimping contours with alpex F50 PROFI. All alpex F50 PROFI press fittings can be crimped using the F contour as well as the U, TH, H and VP contours – using all conventional and certified crimping tools. A clear advantage for the installer, who in most cases, will not need to purchase new tools.

1. Cut the pipe to length with a pipe cutter to ensure a cut at a right angle.
   
2. Calibrate and deburr the pipe end with an alpex deburring tool.
   
3. Fix the fitting by inserting the base body into the end of the pipe. Verify correct location through the inspection hole in the fixation ring.
   
4. Crimp the pipe and press fitting with a crimping tool
   

The alpex-duo XS / F50 PROFI system is extremely durable due to its high temperature capacity and hygienic safety. All flow-optimised pipes and fittings can be installed in a space-saving manner, are easy to insulate and are resistant to hot water up to 95°C at pressures of 10 bar. The press fittings are designed to safely leak if they are left un-crimped. This eliminates the possibilty of a major leak if a joint has been left un-pressed by mistake.